GENERATOR ENGINE BACK FIRES FROM EXHAUST WHEN TURNED OFF?


This subject refers to GX390 OHV Honda Engine Copy done by Lutian China commissioned upon 5.5KW portable generator.

I have not long ago transposed a Head Gasket due to a tiny oil trickle in it as it was burnt due to crude hanging ornament upon a singular of a 4 conduct bolts. Under Load a generator used to onslaught a bit. The deputy gasket was a bit thicker than a a singular which came out. Hence we additionally practiced valve clearances to 0.20MM money coming in as well as 0.25MM empty as per primer (with engine cold at room temp). The engine as well as a generator ran a lot smoother than prior to for we estimate thirty hours with alleviation in fuel manage to buy as well as no leaks. Tested a engine underneath bucket as well as it runs a lot smoother than before. There is no complaint with starting, it starts instantaneously. Spark Plug we am regulating is NGK BKR6E-11. Now when we spin off a generator after an hours make use of underneath bucket as well as when a engine has come to a finish stop after a second there is regularly a singular single behind glow with glow from a exhaust. we have attempted Using NGK BP6ES hint block though behind glow continues. we consternation what is causing this? Can It lead to engine damage? What to check as well as how to repair this? As this shrill cocktail is utterly irritating.

, , , , , , , , , , , , , , , , , , ,

  1. #1 by Stephen on June 24, 2010 - 4:24 am

    You are burning to rich of a mixture go back an tweak it in.

  2. #2 by telwidit on June 24, 2010 - 4:24 am

    Let the engine run on low for a minute or so then turn it off.
    thanks

  3. #3 by me and me on June 24, 2010 - 4:24 am

    you need to adjust the valves mostly the exhaust valve, but the engine must be warm when you do this. double check the specs that don’t sound right to me, maybe thousandths? not mm

(will not be published)

Powered by Yahoo! Answers